Apr 22

Grepolis 2 Bot Guide

This is a bot for the browser game Grepolis, version 2 only!
Grepolis – The browser game set in Antiquity

Bot features

  • Support for all languages
  • Scheduler
  • Browser
  • Notes
  • Unlimited building queue
  • Unlimited army queue
  • Automatic farming
  • Automatic cultural festivals
  • Automatic trading (between your own towns)
  • Automatic send silver to cave
  • Attack warnings by mail (gmail recommended)
  • Sound warnings: Incoming attack & captcha
  • Captcha solver


Quick start guide

  • Check the requirements.
  • Download the bot here.
  • Start the bot and go to the Settings tab.
  • Update the settings and press OK.
  • Go back to the Player tab and press Login.
  • Done!

You can change your building- and army queue at the Queue tab. (Don’t forget to press save)

Donator status
Everyone who donates 5€ or more receives an unlock file which enables the extra features. You can donate using paypal by clicking the button on the right side of the screen. After paypal is done processing your donating I’ll send the unlock file and instructions on how to use it. If you haven’t received an unlock file within 24h after paypal completes the transfer you need to check your spam folder.

The donator status is removed as of 13-04-2015, all features are now available for everyone.

Browser fix
In the bot directory you see a file called Enable_IE9.reg and Enable_IE10.reg. By double clicking the reg file you allow the bot to use the latest version of IE installed on your pc. Use Enable_IE9.reg for IE versions up to IE9, the Enable_IE10.reg file works for IE10 and newer.

Detailed guide
Login Settings
The following four settings need to be changed in order to login: “User Name”, “Password”, “Main Server” and “Server”.
Grepolis 2 server settings
If you open your browser and look at the address bar you can find your server settings. In the picture above your “Main server” would be “en.grepolis.com” and “Server” would be “en18.grepolis.com”.

-Make sure your login settings are correct.
-Press Login.

Building Queue
Don’t forget to press save afterwards for each town.
Grepolis 2 building queue
At the Queue tab you’ll see a building queue for a single town. You can use the “Prev.” and “Next” buttons to switch between towns.
With the checkbox called “Building Queue” you can turn the queue on/off.
With the checkbox called “Building Target” you can switch between building queue modes (explained below).
Mode 1: Target enabled
When you are using this mode you will have to enter the target level for each building. The bot will then choose for you which one it will upgrade first.
Mode 2: Target disabled
With this mode you can choose the order of the buildings yourself. Simply click on the ‘+’-sign to add it to the queue. Double click on an item in the queue to remove it.
Mode 3: Target enabled (advanced)
This mode is an advanced version of Mode 1. In the settings tab there is a setting called “Advanced Queue”, enable this. You also need to enable the target mode. Now the bot will first finish all the buildings in the non-target queue and after that it will continue with the target queue.
Downgrading buildings
Downgrading buildings is supported when using “Mode 2” or “Mode 3” and can be enabled at the Queue tab with the setting “Building Downgrade”. The upgrading of buildings has a higher priority than downgrading.

With the default settings the building/unit queue is checked every 20 minutes. If you go to the first tab you see a few timers, when both the “Next Update” and “Queue” timer have reached zero the bot will check the queue. When the bot can make a building the unit queue will be skipped.

Unit Queue
At the Queue tab you’ll see an overview of your units with the preferred target amount. To enable the unit queue you need to enable the checkbox called “Unit Queue”.
With the default settings the building/unit queue is checked every 20 minutes. If you go to the first tab you see a few timers, when both the “Next Update” and “Queue” timer have reached zero the bot will check the queue. When the bot can make a building the unit queue will be skipped.

At the Queue tab you’ll see a list of templates. With the templates you can save/load your preferred target amount for buildings and units. You can save a template by entering a name and pressing the add button. If you want to update, load or delete a template you can select it at the dropdown box and press the corresponding button.

At the Queue tab you’ll the militia icon. Here you can choose when you want to activate the militia. The value is the number of minutes before an attack. Setting this to 0 will disable the militia.

Spells / God Powers
Finally you see at the Queue tab spell icons. If you enable those icons the bot will only add units to the queue when the spells are active. The bot will also auto-cast the spells when needed.

Don’t forget to press save afterwards for each town.
Grepolis 2 farmers attack
At the Farmers tab you can select which farmers you want to loot. There are also a few settings you can change:
This enables/disables the looting of farmers.
Friendly demands only
If you disable this checkbox you get 2x more resources but it will decrease the mood of the farmer. If you enable the checkbox you get the normal amount of resources and the mood of the farmer will not decrease.
Min. Mood
You can choose when the bot should attack the farmers. If the mood of a farmer drops below this value the bot will use friendly demands only.
Loot Interval
You can choose the interval of the attacks. Those intervals are the same as ingame. Thus you can choose between 5, 20, 120 and 300. If you have the academic research you can choose also between 10, 40, 240 and 600.
It’s recommend to use 5 or 10, those will give you the most resources if you run the bot for a long time.
Max. Resources
The bot will stop farming for your current town when this amount is reached.
With the scheduler you can specify when you want to farm. The scheduler has 24 blocks, one for each hour. You can click on them to turn farming on/off.

Don’t forget to press save afterwards for each town.
Grepolis 2 culture
This feature is only available for donators who donated 5 or more euro. You can find this feature at the tab called “Culture”. With the checkbox in the left-top corner you can disabled/enable the automatic festivals for a town. With the checkboxes below each image you can disable/enable that specific cultural festival.

Don’t forget to press OK afterwards to save your settings.
Grepolis 2 email
This feature is only available for donators who donated 5 or more euro. You can enable this feature at the tab called “Settings”.

  • Email: The email address that should receive the warnings
  • Notify By Mail: Enabled this when you want to receive warnings
  • User Name: Your gmail account
  • Password: Your gmail password
  • Server: The mail server (gmail)
  • Port: Default port (gmail)

Advanced users could use any other encrypted mail server if they want but I recommend to use gmail.

Don’t forget to press Save afterwards to save your settings.
Grepolis 2 email
This feature is only available for donators who donated 5 or more euro. With this feature the bot can automatic transfer resources between your towns. When sending resources it will send them from the nearest available town.

  • Enabled: Turn the trading feature on or off.
  • Mode: Sets if the current town should receive resources or send them.
  • Min. Resources: (Mode send only) The minimum amount of resources you want to keep in your warehouse.
  • Max. Resources (%): (Mode receive only) The maximum amount of resources you want to receive in your warehouse.
  • Min. capacity to use: (Mode send only): The minimum amount of resources you want to send each time.
  • Max. trade distance: (Mode send/spy): For towns receiving resources. The town will request resources from all other towns within this distance.

In this mode a town can only receive resources. The other towns will keep sending resources to this town until your warehouse is full enough.
The setting “Max. Resources” defines when your warehouse is full enough. The value of this setting can be between 1-100%.

In this mode a town can only send resources. It will send the resources to the nearest town first. Also it will first send the resource that is needed the most.
With the setting “Min. Resources” you can choose how many resources you want to keep in your own warehouse. You could for example choose 18000. Then you will always have enough resources for the cultural festivals.
With the setting “Min. capacity to use” you can set the minimum amount of resources you want to send to an other town. This setting should always be higher then 100.

“Spy cave”
In this mode a town sends his resources to the spy cave. Just like towns in the “Sender” mode it uses the setting “Min. capacity to use”. This setting specifies the minimum amount of resources you send to the spy cave. With the setting “Min. Resources” you can specify how many resources should remain in your warehouse. If you don’t have enough silver the trade mode will temporarily be switched to “Receiver”.

Captcha Solver
If your useragent contains MSIE 7.0, like in the screenshot below. You first need to run the “Enable_IE9.reg” or “Enable_IE10.reg” file. Otherwise the bot will not be able to detect the captcha message.
Grepolis 2 captcha solver
A detailed guide for the captcha solver is available here.


4 pings

Skip to comment form

    • Daedalus on September 9, 2012 at 09:10
    • Reply

    Hey UTHAR first of all I have to say your BOT is an awesome piece of work. I think you could probably outshine those uimbells working at innogames who just did a server rollback on the newest worlds and screwed a ton of people. I’m talking lost gold, conquers being reversed, supports being converted into attacks, false time lines and chain of events, complete chaos, they claim “accidental due of a server migration.”

    In any event I have to ask you if the Grepolis 2 Bot is meant to work off the Internet Explorer Browser engine then why does my Bot report the following under the BROWSER TAB: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C) ??

    Its strange Mozilla Firefox is not designated as my default browser but even if I set Google Chrome, or Firefox or even Opera as Default Browser it still says that in the Bot prior to logging into the Grepolis Server.

    I have been noticing what others have commented the BOT experiences increasing lagg the longer it runs and if you use it to check and respond to mail messages, post in forums, sending attacks/support etc etc. I am running Windows XP Service Pack 3 and I previously had added the IE 9 REG FILE into the registry (or so i think) and the performance as far as laggg continues the same. 1)How can I tell if the IE9 Registry File data was added to the Windows Xp database. 2) Are there other settings can reduce the laggg? (sometimes closing Bot and restarting and reconnecting help for a time). 3) Sometimes certain functions in the bots browser don’t work say like a “REPLY” button on a Forum Post, the “Publication” button on Battle Reports and Spy Reports, (button will highlight detecting the presence of the mouse pointer but won’t work when you click on them and sometimes F5 will make it work), 4) Sometimes when the bot is “laggy” it has a kind of freezing effect even the status messages at bottom left of the bot will lock in whatever it currently says until the lagg or freeze goes away, is that normal??

    I would appreciate any advice and am so looking forward to donating. Keep up the good work!

    1. Wow, That doesn’t sound very good. Looks like a bigger problem then just a “accident due of a server migration.”

      Regarding the browser, maybe a bit strange but Internet Explorer and Chrome also start with Mozilla. For IE you have to look for MSIE. In your case it says MSIE 8.0. Which means that the bot is using IE 8.0.

      The Enable_IE9.reg file makes it possible for the bot to use the latest version of IE installed on your PC. If you go to the browser tab you can see if it is successfully enabled. If I remember correct it will show MSIE 6.0 when the file hasn’t been used yet.
      The browser lag is still something I’m trying to improve. But I haven’t found anything yet to improve it further.

    • Alex Sandro on September 9, 2012 at 18:58
    • Reply

    Não sei proque meu boot não funciona direito, sempre aparece isso aqui :

    09/09/2012 14:55:01
    09/09/2012 14:54:31 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:52:02
    09/09/2012 14:51:58 Nazaré: Navy queue is diabled for this town (or queue is full).
    09/09/2012 14:51:58 Nazaré: Army queue is diabled for this town (or queue is full).
    09/09/2012 14:51:58 Nazaré: Building queue is disabled.
    09/09/2012 14:51:58 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:49:29
    09/09/2012 14:48:44 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:46:32
    09/09/2012 14:42:55
    09/09/2012 14:42:51 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:40:26
    09/09/2012 14:40:18 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:38:04
    09/09/2012 14:37:46 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:35:15
    09/09/2012 14:35:11 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:32:39
    09/09/2012 14:30:40 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:28:10
    09/09/2012 14:14:39 Nazaré: Nothing to build.
    09/09/2012 14:14:39 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 14:12:19
    09/09/2012 13:38:40 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 13:36:24
    09/09/2012 13:36:21 Nazaré: Farmers are disabled for this town by scheduler.
    09/09/2012 13:33:57
    09/09/2012 13:33:45 Nazaré: Farmers are disabled for this town.
    09/09/2012 13:31:17
    09/09/2012 13:30:49 Nazaré: Farmers are disabled for this town.
    09/09/2012 13:28:38
    09/09/2012 13:28:29 Nazaré: Farmer settings not yet loaded.
    09/09/2012 13:27:55 Towns sorted alphabetically.

    e nunca consigo farmar as aldeias.

      • Uthar on September 10, 2012 at 10:20
      • Reply

      English please next time.

      If I look at your log you still have disabled most of the features. Could you read the Guide on this page and enable the features you want to use.

    • Algol on September 10, 2012 at 01:49
    • Reply

    Hello im using the hot and i believe all my settings are right. but when i got to the farmers tab and click my city and hit select there is no town available 🙁

      • Uthar on September 10, 2012 at 10:34
      • Reply

      The farmer settings are disabled during the first update. When the “Next update” timer is ready for the second time you will be able to change and save the settings.

    • Daedalus on September 10, 2012 at 04:51
    • Reply

    Hey Daedalus do you happen to know if an Antivirus Program or Anti-Malware/Spyware program like (Spybot Search & Destroy / Malwarebytes Anti Malware) could be doing something in the background that can conflict in some way with the Grepolis 2 Bot causing to laggg and freeze at time? I use Avast Antivirus. I think I noticed that if I disable the all the Avast Shield Controls the game inside the bot responds quicker and smoother.

    The only thing after doing that I find continues to be annoying is when the functionality of “buttons” or options break and STOP WORKING. As I said before without doing a Refresh with F5 (which does NOT always cure the issue for a little while) buttons like the PUBLICATION button on Spy/Battle Reports will NOT work, neither will clicking on Mail Messages (won’t open up), the “REPLY” button on Forum threads won’t work (although the “Quote” function will continue to work, and sometimes you can NOT even select land or naval units to build in the harbor or barracks.

    I am aware that you say the Bot requires NET FRAMEWORK and “Java Scripting” installed, is it possible these can get “corrupted” and if so how do you figure that out and whats the best way to reinstall them??

      • Uthar on September 10, 2012 at 10:54
      • Reply

      Every tool that monitors in/out going network trafic could in theory slow down the program. But almost all tools can process the data fast enough so that you wont notice anything.

      My guess is that the problem with all the buttons and links is the javascript code that fails. Unfortunately I have already apllied all the know fixes to improve the perfomace. When I find an other solution I’ll implement it as soon as possible.

      • R on November 21, 2012 at 17:57
      • Reply

      It might be Internet Explorer case. I were looking for better solution and I have one. But it’s in Java so it does not apply for this bot.

    • joao on September 12, 2012 at 16:19
    • Reply

    September 11, 2012 at 02:11 (UTC 1)

    i´’m a big fan of your job since i played grepolis 1.0 PT version but i stopped to plaing and now i’m back with the grepolis 2.0 BR version in the world19 and downloaded the latest version of the bot but when the browser of the software logs in my account and show the worlds that i have, but it gets back to the login page and then says “Can’t connect, check your settings”.

    I would like very much if you told me what to do to fix it

    thank you for your time

    September 11, 2012 at 10:12 (UTC 1)
    Welcome back then

    But it’s the wrong topic though, this one is for the 1.0 version of Grepolis. Next time use http://bots.uthar.nl/155/grepolis-2-bot-guide or post in the topic of your current version.

    Could you post the Main server and server you’re using? And also the debug.txt file.

    as asked:
    12/09/2012 12:18:23 Exception in setCookies(): Referência de objeto não definida para uma instância de um objeto.

      • Uthar on September 12, 2012 at 21:18
      • Reply

      Your server settings are correct. But it looks that there is a problem with your Internet Explorer settings.
      Could you try if you are able to play the game in Internet Explorer?

        • joao on September 12, 2012 at 22:36
        • Reply

        tank you very much,
        i didnt even realised that my Internet Explorer wasn working with GREPOLIS because i just use google chrome.

          • Uthar on September 13, 2012 at 11:24
          • Reply

          Let me know if you have problems fixing it. (It’s probably the privacy setting)

    • Max on September 14, 2012 at 16:55
    • Reply

    Hey uthar @first thanks for your nice bot 😉
    I ve a question:
    If i want the bot trading automatically between my towns, so that there is a equal amount of ressources in every town ( to be able to build in every town as fast as possible) can i set al towns to SEND or do i need to set one town to send (with the farmings) and the other without farming with less ressources to receive?
    Hope you understand what i mean 😉

      • Uthar on September 14, 2012 at 19:34
      • Reply

      Equal resources in your towns is not possible. A town is either a sender or a receiver. So you should use completed towns to send all your resources.

    • JD on September 15, 2012 at 05:32
    • Reply

    Hey man, thanks for the bot! It’s pretty sweet! I was just wondering my browser has a lag and I was wondering if there was something I could do to fix that or if it’s like that for everyone?

      • Uthar on September 15, 2012 at 11:37
      • Reply

      The “Enable_IE9.reg” file improves it a bit but there will always be some lag.

        • JD on September 15, 2012 at 18:36
        • Reply

        Ok yea I enabled it already. Thanks

    • Bilbo on September 18, 2012 at 09:52
    • Reply

    I want to keep one town with max resources with help from an other town. This giving town should also store silver in cave when the receiving towns silver is above 95%.
    Is this possible? It seems that trade happens only when one is set to receive and the other to send. Nothing seems to happen when one is set to receive and the other to ‘spy cave’.
    Thanks for a great bot.

      • Uthar on September 18, 2012 at 16:17
      • Reply

      When a town is set to spy cave it will store silver if it has enough. When the town doesn’t have enough silver it will temporarily switch to receiver so that other towns can send silver to that town.

    • Anonymous on September 18, 2012 at 16:11
    • Reply

    got banned right after update 🙁

    be warned

    • Bilbo on September 18, 2012 at 23:59
    • Reply

    Me too. Any tips on how to awoid detection?

      • Uthar on September 19, 2012 at 13:54
      • Reply

      You could follow the tips at “Detection status”. On the top-right side of this page.
      Besides that there isn’t much you can do.

        • Bilbo on September 19, 2012 at 23:17
        • Reply

        Thanks! What would You consider a long time? 12 hours / 12 days?

          • Uthar on September 20, 2012 at 07:53
          • Reply

          That really depends on the server and how active the moderators are checking this. On some servers you can even farm 24/7.

          I recommend however to never farm more then one hour in a row. You can use the scheduler for that like this: Farm one hour, take a break for 1-2 hours, farm again for one hour, etc.

    • Alexander on September 19, 2012 at 08:36
    • Reply

    Hi mate,

    Can’t get trade to work… any tips? just doesnt send resources anywhere

      • Uthar on September 19, 2012 at 13:55
      • Reply

      Is the trade timer working?

    • Rock on September 19, 2012 at 10:34
    • Reply

    So far I have only used the bot to get resources from farmers and it works fine. I have to insert my login information everytime I start the bot, I also have to set up all the options (for farming etc.) everytime. Is this working as intended or can I do something to keep my settings when I close the bot? Or is there a file I can edit to save my information?

      • Uthar on September 19, 2012 at 13:58
      • Reply

      Did you extract the bot or are you running it directly from the archive?
      If you already did that make sure you press the save button after changing your settings.

    • Massimo on September 28, 2012 at 08:08
    • Reply

    This morning i’ve paid the donate for unlock the functions of Grepolis 2 Bot v2.3.0.2, but my bot don’t run good…
    The extra function are not able…Thank you best regardes

      • Uthar on September 28, 2012 at 08:55
      • Reply

      I have to activate your account manual. You’ll receive the unlock file + instructions in a few minutes.

    • coryb on October 3, 2012 at 01:37
    • Reply

    hey there ive set in all the right info for the bot but cant log in still and wen i go to browser it dosnt pop up until after i hit login on the main page do i \have to redownload it or wats up??

    1. If you’re sure your account/server settings are correct it could a problem with your browser settings. Can you try to play the game in Internet Explorer?

    • Greivid on October 6, 2012 at 16:46
    • Reply

    I have other question, farming is directly or I must why to the bot? if the answer is the first…. It doesn’t works for me S: I have done all the tutorial but it doesn’t works for me. I have the requeriments too.

    1. If you go to the farmers tab you can select a town and then you can choose which farmers it should loot.

        • Greivid on October 7, 2012 at 00:21
        • Reply

        Yes, I have done that but the bot doesn’t farm to me. Have I done something wrong?

        1. What kind of messages do you get in the log tab about the farmers?

    • Brian on October 7, 2012 at 00:16
    • Reply

    I just saw that Grepolis newer update will have a bot detector.
    Is this something new, or an advance on their part.


    great program.

    1. This a new kind of detection system for Grepolis. At the moment there is not much we can do about it. See this post for more information:

    • Gio on October 8, 2012 at 18:41
    • Reply

    I have made a donation but i don’t yet receive the unlock file which enables the extra features.

    1. Thanks for the donation Gio, you’ll receive it in a few minutes.

      If you haven’t done so already you should read this post regarding the new Grepolis update:

    • Jim on October 8, 2012 at 22:43
    • Reply

    i love this tool. just 1 problem. until yesterday my bot ran fine but now it wont farm for me. it says no farmers available. now i play 2 worlds 36 and 49 and the bot works fine on 36 but will not farm on 49. i have restarted my computer and also downloaded the newest bot but it still wont work. this is what the debug txt says:10/8/2012 5:08:26 PM Ingame error in attackFarmers2Response(): Ungültiger Zeitwert ( 600). any suggestions?


    1. That error means that there is something wrong with your loot interval in at least one of your towns.
      The intervals 5, 20, 90 and 240 are allowed. If you have done the research you can also choose 10, 40, 180 and 480.

    • Bilbo on October 9, 2012 at 00:00
    • Reply

    Grepolis now claims they will implement a new bot detection system with the update to Grepolis 2.30. Does anybody know if this should concerne us?

    1. Yes this concerns us, see this post for more info:

    • HASHISINHO on October 11, 2012 at 20:18
    • Reply

    how do you put constructions of buildings and units on the bot? i put, but not ta working

    1. Choose one of the three building modes as explained in this guide and set up your building queue accordingly.
      After that just wait until the “Next update” timer and “Queue” timer reach zero.
      In the log tab you can see whether or not the bot added something.

    • azyz on October 27, 2012 at 12:57
    • Reply

    can’t connect check your settings ?????????

    1. Just do what it says 😉 Check your settings.

      Make sure the following 4 settings are correct:
      -User Name
      -Main Server

    • mr.OH on October 29, 2012 at 10:32
    • Reply

    i cant see OK button on the setting? where is it locacated? becuz i relize that w/o press OK i cannot connect to my server..

    1. It’s located in the bottom left corner of the settings tab. You can maximize the bot window if you can’t see the button.

        • mr.OH on October 29, 2012 at 14:44
        • Reply

        after maximize.. i cant see it too.. my highest screen resolution is 1024 x 600..

        1. I’ll see what I can do about that in the next version. For the time being you can open the file settings.xml (Located in the Config directory) with notepad and change your account/server settings.

          You need to change those 4 settings:
          GenUserName=”Enter your name”

            • mr.OH on October 29, 2012 at 15:22

            awww… idk how to change the setting in xml =S

            • Uthar on October 29, 2012 at 15:29

            It’s really not that hard, just give it a try. The worst thing that you happen is that the bot crashes. Should that happen you can just delete the bot and download it again 🙂

            If you want to try it you can follow these steps:
            1) Close the bot
            2) Right mouse click on the “settings.xml” file
            3) Click on “Open with” and select notepad
            4) Change the settings that I mentioned in my previous post
            5) Save and close notepad
            6) Open the bot

            • mr.OH on October 29, 2012 at 15:56

            thx.. its work fine ^^

    • pepote on November 1, 2012 at 02:24
    • Reply

    one question about trade. If you put all your citys in send mode, they can receive? o maybe the bot only trade to the citys with the mode receive?

    I dont know if i expliain it good

    1. No only the towns that are in receive mode can receive resources. For the trade feature to work correctly you need to have different towns in send mode and in receive mode.

  1. Thank you very much, that was exactly what I was looking for, it’s working and doing its job. Tested on Romanian servers!

    • Speedy on November 4, 2012 at 20:54
    • Reply

    I need some help:
    Everytime i try to login,it says “Can’t connect,check your settings.” But in my Settings i have everything correct.
    i have my username and Password right and the Servers are also right. I also have IE 9 and in the tab Browser i can Log in normally.

    Is it because i play on a German Server? Are they not supported?

    1. All servers are supported. Did you already use the “Enable_IE9.reg” file?

    • mike on November 13, 2012 at 22:23
    • Reply

    cant get the building target mode to work…

    1. Go to the queue tab and select a town. Make sure “Building Queue” and “Building Target” are enabled.
      Now you can enter for each building your preferred level.
      Don’t forget to press save afterwards.

        • mike on November 14, 2012 at 21:10
        • Reply

        Thx man …

    • Costi on November 21, 2012 at 17:00
    • Reply

    Thank you very much…it’s doing great job!!! Tested on Greek server…

    • Jampher on November 22, 2012 at 05:23
    • Reply

    Uthar Freund, guten Tag, ich weiß nicht, was ich falsch mache more’re nicht ans cptcha. Ich habe die Platte in 9kw.eu verdient 30 Credits und haben nur zu beantworten heute über 6 captcha. Was könnte falsch sein?

    Da ich bereits schätzen die Aufmerksamkeit.

    1. My German is not that good. Could you try it in English.
      Are you having problems earning credits on 9kw? or do you have problems with the bot?

    • Chris on November 23, 2012 at 03:52
    • Reply

    uthar…what about the max trade distance? what the values between for?
    thans in advance

    1. The trade distance is calculated using the coordinates of your towns. With this setting you can choose how far your trade ships should travel.

      The list of towns you see on the right side are all the towns that can be reached with your current “max trade distance” setting.

    • Stephan on November 28, 2012 at 01:16
    • Reply

    Hello Uthar,
    well in world phi, I was trapped and got a blocking punishment for 5 days, because of farming in regular intervals of a second. Do you have a possibility to make a variable, or better a random clock rate between 2 and 5 seconds for sampling? Thank you in advance,
    best regards

    1. You can already randomize the intervals with the settings “Min. Delay Farmers (ms)” and “Max. Delay Farmers (ms)”. In your example that would be 2000 and 5000. I can’t make it any more random than that.

    • Jampher on November 28, 2012 at 03:09
    • Reply




    IMAGE 01: http://prntscr.com/krviq

    IMAGE 02: http://prntscr.com/krvod

    1. When the bot detects a captcha it will pause itself. It’s not supposed to reconnect.
      After you have solved the captcha manually you can press the resume button and the bot will start again (You do not need to restart the bot!)

      The captcha’s will only be solved automatic when your donator status is active.

    • adri on November 28, 2012 at 13:45
    • Reply

    hi Uthar

    please help me…

    Tanks for taking your time to make this bot, and to help others
    But i have a problem whit it every time it sincronise
    i get this msg.

    28/11/2012 13:41:16
    28/11/2012 13:41:16 Valencity: Farmers are disabled for this town.
    28/11/2012 13:39:00
    28/11/2012 13:39:00 Valencity: Farmers are disabled for this town.
    28/11/2012 13:36:33
    28/11/2012 13:36:33 Valencity: Nothing to build.
    28/11/2012 13:36:33 Valencity: Farmers are disabled for this town.
    28/11/2012 13:34:05
    thak you so much for helping me and sorry for mi english

    1. You need to configure your town first. Go to the farmer tab and select a town. After that select all the farmers you want to loot. Press save afterwards.

      The building queue is similar. First go to the queue tab and select a town. After that choose one of three building queue modes to fill the queue. See the guide for a more detailed explanation.

    • Miguel Z on November 28, 2012 at 18:12
    • Reply

    Hi why when I click save and go back to the game(after refreshed) i havent got the things that I want
    Of course Im logged with your program without opening any another browser plis answer me fast

    1. The building queue and unit queue is updated when both the Refresh timer and the Queue timer reach zero (00:00:00). Also make sure you have enough resources.

      You can open the log tab to check what the bot is doing. It will show for example when you start making a new building or when add new units to the queue.

    • Bob on December 2, 2012 at 03:47
    • Reply

    Thanks for the Bot its helping alot!

    Just a couple of questions

    (1) When i use the bot on a 22 inch monitor all the queue (ie. the Colony Ship) is visible but when I use the bot on a 17 inch screen the window is cut off right at the Trireme icon. Is there something i can do to fix this on the 17 inch screen? By the way the Overview and Culture tabs have a scroll bar at the bottom that works fine.

    (2) The resume button stays grayed out after the captcha is solved and I have to close the bot down and restart. Is there anything I need to set to make the resume button work? I do have two instances of the bot running on two different servers but the second bot works fine after the captcha.

    Thanks again for the bot and your time


    1. 1) Sure I’ll see what I can do. Probably I’ll add some extra scrollbars. Could you also post a screenshot of this?
      2) Could you post a link to your debug.txt and log.txt files or send them to me by email?

    • argiris on December 2, 2012 at 14:05
    • Reply

    hallo uthar i have made a donation but still havent got the unlock key
    can yoy help me;

    1. Thanks for the donation and sorry for the delay. I have send you the unlock file + instructions a few minutes ago.

    • argiris on December 2, 2012 at 14:59
    • Reply

    sorry for the incomvinirnce but there seems to be a problem.
    the account i am playing the game with has been set with my alternative e mail will the unlock feature still work for it;
    sorry for my english!

    1. That wont be a problem. The unlock features will work just fine 🙂

    • Jampher on December 13, 2012 at 09:13
    • Reply

    Uthar not have the option of pushing the button to restart the game please see imagem : http://prntscr.com/m22l7 button is disabled

    1. Here is a beta release of the next version:

      It already fixes your problem but I want to add a few more things before releasing the official version.

    • Jampher on December 13, 2012 at 10:13
    • Reply

    Uthar, and I thank fazewr nonativo the next week in order to have all the benefits alright!
    with this version solves the problem?

    1. Yes this version solves your problem.

    • leodan1336 on December 13, 2012 at 20:00
    • Reply

    Hey Uthar,

    bot isnt really working anymore for the german version of grepolis. It says “Connection to: *****@de*.grepolis.com” without logging in. The integrated browser works fine.

    It may be because of the new update for german grepolis which got live today. Everything worked perfectly before …

    Would be nice if you could solve the problem, I was about to donate >.<

    • frenchplayer on December 14, 2012 at 17:02
    • Reply

    Hello Uthar

    same problem on French server

    Bot is not working since demeber 13

    it says “connecting to …”

    browser is ok

    but nothing happen

    city are disable

    Thank you nd sorry for my bad english

    1. Some of the problems caused by 2.33 are already fixed but there are still a few problems remaining.
      Maybe I’ll release the next version tonight.

    • sean on December 18, 2012 at 12:31
    • Reply

    Love your bot, can not thank you enough. There is an update coming out on the 20th of december for the US servers.. do you know anything about this and if there is danger in using your bot when it updates?

    1. The bot is already fixed for that update. As soon as your server receives the update you should download version

    • Tigerhobbes2 on December 21, 2012 at 13:45
    • Reply

    Hello Uthar,
    I’m using your bot on a Mac with Parallels Desktop, and after a few problems installing all this stuff, it’s working fine.
    The only issue is that the integrated browser is really-really slow.
    I’m not a specialist on PCs, but I tried to follow your advice by double clicking on this Enable_IE9.reg thing.
    It installed something, but it didn’t improve at all.
    Any idea ?
    By the way, I’ve just send you a donation by Paypal, don’t know if you will be able to send me the activation code before you leave for holydays.
    Anyway, joyeuses fêtes as we say in France.

    1. Happy Holidays to you too Tigerhobbes,

      The Enable_IE9.reg file adds some extra info in the register so that the bot can use the latest version of IE installed on your pc.
      I have however no idea if this has any effect on a Mac when you use Parallels Desktop. But if I read your message it appears it doesn’t really work.

      Could you post the text (user-agent) you see in the browser tab before you start the bot?

      Also you should have received your activation code now 🙂

    • mop on December 22, 2012 at 10:02
    • Reply

    Hi Uthar,

    problems with farming – log says:-

    22/12/2012 09:01:14
    22/12/2012 09:01:14 errr: No farmers available at the moment.
    22/12/2012 08:58:37
    22/12/2012 08:58:37 errr: No farmers available at the moment.
    22/12/2012 08:56:29
    22/12/2012 08:56:29 errr: No farmers available at the moment.

    It has worked once so far



    1. Go to the farmers tab and select a town. Make sure all the farmers are selected you want to loot.
      After that just wait 🙂 The bot will loot them when the timer is ready.

    • joan on December 30, 2012 at 05:50
    • Reply

    Hello uthar,

    i just got the bot but i really dont know how to use it

    it work fine on my windows 8 but i just can seem to get it. like when i use it i dont know what am doing or if am doing it right. if you can get me a nice tutorial or better way on how to under stand the program it would be awesome


    1. Everything that you need to know is already explained in this guide. You need to come with a more specific question if you are having problems with something.

    • SR311 on December 31, 2012 at 12:14
    • Reply

    Hi uthar,

    Thank you very much for developing great Bot.

    Why you set Max. Resources (Farm) to 50,000?

    I am demanding resources from 7 farms and each farm has 17200, So 50000 is too low.

    Or is there any way to reset Max. Resources counting ?

    1. 50.000 is more then enough. Each farmer has its own limit. The resource counting will reset once every day.

    • yuri on January 1, 2013 at 19:10
    • Reply

    ola boa td, olha como eu faço pra tem esse programa ????

    1. English please .

    • sak on January 3, 2013 at 13:44
    • Reply

    hi uthar

    i have a problem with the browser…not working!
    farmers etc are OK but browser is frozen at sea 00 and i can’t see my villages and my island
    Moreover my status stays INACTIVE after the login

    1. Make sure you have updated your Internet Explorer to the latest version and have run the Enable_IE9.reg file.

      The bot works fine even if your status is inactive. For donators the status is active, this will enable some extra features of the bot.

        • sak on January 3, 2013 at 16:33
        • Reply

        finally the internet explorer was the problem! thanks a lot UTHAR

    • stkr on January 3, 2013 at 17:14
    • Reply

    Hello Uthar,

    first I wish you a happy and successful new year.
    I have some questions about priority things, which I want to explain by example:
    Situation 1: Farming more then one Town on a island
    If I have 2 or more Towns on the same Island, can I configure the bot, to farm them rotational?

    Situation 2: Trading and Culture:
    How could I configure the trading, that it will not send too much ressources away so there can’t get a festival there? Which Tab has more priority? The Trading or the Culture?

    Thanks for your work, keep up going like this 😉

    1. Thanks stkr, you too.

      1) The only way to farm effective with more than one town on the same Island is by using the Farmers tab. You need to select there which farmers a town should loot.

      2) The culture festivals are checked before trading. To manage the amount of resources in your warehouse when using the trade feature you can use the setting “Min. Resources”. If you look at the guide (in the trade section) you’ll find a detailed description of all the settings related to the trade feature.

    • SR311 on January 4, 2013 at 21:48
    • Reply

    Hi Uthar,

    >the default settings the building/unit queue is checked every 20 minutes

    How can I change this interval ?

    1. With the “Timer (Minutes)” setting. It’s located on the Settings tab under “Building / Training Queue”.

    • dessembrae on January 6, 2013 at 19:13
    • Reply

    yea i had already tried clearing the cache and using Enable_IE9, browser tab still gets jammed on the loading screen, i have IE 10, but the bot was working fine with it a few days ago when i first downloaded

    1. If it was working fine before then your problem has nothing to do with the Enable_IE9 file or with your version of IE.

      It’s probably just a temporarily problem with the browser. This can also happen when you’re not using the bot but just a normal browser.
      You could try restarting the bot a few times. Or try pressing F5 a few times when it’s stuck at the loading screen.
      Also clearing your internet cache is a good idea, even thought it didn’t work for you the first time.

Leave a Reply

Your email address will not be published.

WordPress SEO fine-tune by Meta SEO Pack from Poradnik Webmastera